Two-liquid mixing dispenserのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Two-liquid mixing dispenser - メーカー・企業と製品の一覧

Two-liquid mixing dispenserの製品一覧

1～7 件を表示 ／ 全 7 件

表示件数
Micro-volume dispensing two-liquid mixing dispenser (dispensing device) MGP-X020

Micro-volume dispensing two-liquid mixing dispenser (dispensing device) MGP-X020

Micro Dispensing Two-Component Mixer MGP-X020

**Standard Model with Enhanced Basic Performance of the Two-Component Mixing and Discharge Device** This device consists of two MGP-II type gear pumps, each driven by a speed control induction motor, a main unit that allows for discharge time settings via a timer and variable discharge volume per unit time, and a separate mixer MX-112 that facilitates easy exchange and cleaning using a one-touch coupler. It is an extremely compact and low-cost model as a two-component mixing and discharge device. **Features** - Compact and low-cost. - Easy to set discharge conditions. - Capable of high-precision discharge. - Can discharge very small amounts (from 0.0002g). - Capable of mixing and discharging fast-curing resins (pot life of 2 minutes). - Easy maintenance. - Can be operated with AC100V only. - The mixer section offers a cartridge-type forced mixing system that allows selection of optimal conditions from numerous combinations of stirring rotor shapes, volumes, and rotation speeds. (Static mixer specifications are also available.)

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Micro dispensing two-liquid mixing dispenser (discharge device) ID-200N

Micro dispensing two-liquid mixing dispenser (discharge device) ID-200N

It is possible to apply two-component adhesive using a 3-axis robot! The two-component adhesive is mixed with high precision while being dispensed in small amounts.

**Main Features** - Our two-component mixing dispenser utilizes a high-volume efficiency original gear pump, resulting in minimal changes in discharge volume and mixing ratio due to variations in temperature and viscosity, allowing for stable mixing and discharge over long periods. - It features a mixing section designed for rapid curing. The cartridge system allows for easy maintenance, with minimal maintenance required outside of the mixing section. - Communication with external systems is facilitated through I/O connectors, making it easy to integrate into automated lines. - One-shot discharge, continuous discharge, discharge volume and time, and suck-back volume can all be easily set using a numeric keypad, requiring no specialized skills from the operator. Coating conditions can be easily configured to meet customer requirements. - Enhanced management functions necessary for two-component mixing and dispensing equipment ensure high reliability. **Technical Information** A digest version of "Mixing and Discharge Method for Two-Component Rapid Curing Resin" is currently available. The complete version can be sent upon request.

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
New Product: Two-Component Mixing Dispenser "ID-200R"

New Product: Two-Component Mixing Dispenser "ID-200R"

A two-component mixing dispenser equipped with the necessary functions for two-component mixing. The discharge volume and mixing ratio can be accurately set with numerical values.

This is a two-component dispenser that achieves high-precision mixed dispensing, driven by a 5-phase stepping motor, with a control unit specially designed for two-liquid discharge, utilizing a micro gear pump with quantitative stability. It is a cartridge-type forced mixing mixer that allows for optimal conditions to be selected based on the shape, volume, and rotation speed of the mixing rotor. This device is suitable for sealing processes that require minute amounts of two-component adhesives. Features: Based on the fundamental data of the incorporated pump, the discharge volume, discharge time, and suck-back amount can be easily set via a touch panel. The MGP-type gear pump, with its high volumetric efficiency, ensures that changes in discharge volume and mixing ratio due to variations in temperature and viscosity are minimal, allowing for long-term stable two-component mixed dispensing. The mixer, compatible with fast-curing resins and equipped with a cleaning mechanism, enables stable dispensing for extended periods without nozzle clogging. The built-in discharge volume counter allows for tank level management without the need for a level sensor. It can memorize 31 different channel settings. The standard I/O connector makes it easy to integrate into automated lines. *For more details, please refer to the PDF document or feel free to contact us.*

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High discharge volume dual liquid mixing dispenser (MGP-X030)

High discharge volume dual liquid mixing dispenser (MGP-X030)

Less affected by changes in temperature and viscosity! Suitable for large volume discharge applications.

●A two-component mixing dispenser of the MGP type that is less affected by changes in temperature and viscosity. ●Equipped with the MGP micro gear pump, known for its quantitative stability, and a mixer section with an integrated nozzle structure designed for rapid curing, it enables stable discharge over long periods. 【Features】 ◆Easy to set discharge conditions ◆High precision discharge capability ◆Ideal for large volume discharge (approximately 15cc/min to 200cc/min) ◆Capable of mixing and discharging fast-curing resins (pot life of 2 minutes or more at over 0.3cc) ◆Easy maintenance ◆Operates solely on AC100V, without the use of pneumatic systems.

  • Flow Control

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Micro-volume dispensing two-component mixing dispenser (dispensing device) ID-200N

Micro-volume dispensing two-component mixing dispenser (dispensing device) ID-200N

This is a two-component mixing dispensing device that can precisely mix and dispense small amounts of two-component adhesives such as epoxy, urethane, and silicone resins.

**Main Features** ● Our two-component mixing dispenser utilizes a high-volume efficiency original gear pump, which allows for stable mixing and dispensing over long periods with minimal changes in discharge volume and mixing ratio due to variations in temperature and viscosity. ● It features a mixing section designed for rapid curing. The cartridge system allows for easy maintenance, with minimal maintenance required outside of the mixing section. ● Interaction with external systems is facilitated through I/O connectors, making it easy to integrate into automated lines. ● One-shot dispensing, continuous dispensing, discharge volume and time, and suck-back amount can all be easily set using a numeric keypad, requiring no specialized skills from the operator. Coating conditions can be easily configured to meet customer requirements. ● Enhanced management functions necessary for two-component mixing dispensing systems ensure high reliability. *For product details, please refer to the catalog.*

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-output two-component mixing dispenser (discharge device) ID-300N

High-output two-component mixing dispenser (discharge device) ID-300N

High-precision two-component mixing dispensing device for epoxy, urethane, and silicone resins.

This is the latest model of a dispenser (ejection device) for high-precision dispensing of two-component epoxy, urethane, and silicone resins using the MGP method, which is less affected by temperature and viscosity changes! It enhances management functions such as rotation speed monitoring and tank remaining amount display, achieving high reliability. **Main Features** - The well-regarded MGP micro gear pump is driven by a 5-phase stepping motor, enabling high-precision mixing and dispensing through a specially designed control unit. - Based on the basic data of the pump and mixing ratio imported into the controller in basic data mode, both single-shot and continuous dispensing allow for free setting of dispensing volume, dispensing time, and suck-back amount. - Regularly checking the numerical values of the basic data makes it easy to manage the dispensing volume. - The built-in dispensing volume counter makes the tank remaining amount clear at a glance. - It is equipped with a log-saving function for operational history, allowing for verification in case of errors. *For detailed features and specifications, please download the PDF catalog.* *For inquiries about other content, please contact us via the "Request for Information" form.*

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Micro dispensing two-liquid mixing dispenser (discharge device) ID-200N

Micro dispensing two-liquid mixing dispenser (discharge device) ID-200N

This is a two-component mixing dispensing device that can accurately mix and dispense small amounts of two-component adhesives such as epoxy, urethane, and silicone resins.

**Main Features** ● Our two-component mixing dispenser utilizes a high-volume efficiency original gear pump, allowing for minimal changes in discharge volume and mixing ratio due to variations in temperature and viscosity, enabling stable mixing and discharge over extended periods. ● It features a mixing section designed for rapid curing. The cartridge system allows for easy maintenance, with minimal maintenance required outside of the mixing section. ● Communication with external systems is facilitated through I/O connectors, making it easy to integrate into automated lines. ● One-shot discharge, continuous discharge, discharge volume and time, and suck-back volume can all be easily set using a numeric keypad, requiring no specialized skills from the operator. Coating conditions can be easily configured to meet customer requirements. ● Enhanced management functions necessary for two-component mixing and dispensing systems ensure high reliability. ★ Technical Documentation ★ The "Mixing and Discharge Method for Two-Component Rapid Curing Resin" is also available. For more details, please download the documentation or contact us.

  • dispenser

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.